Aviation Safety Inspector, (AW) Principal Maintenance Inspector

Job Description:

The Principal Maintenance Inspector (PMI) is responsible for recommending new and amended Title 14 Code of Federal Regulations (14 CFR) for the development and implementation of standards, programs, and procedures for Federal Aviation Administration (FAA) field personnel and the public governing all matters to air carrier maintenance safety issues.

Duties

The PMI receives administrative direction from management in terms of broadly defined missions or functions. The PMI, mostly independently plans, designs, and carries out programs, projects, studies, or other work. The PMI provides policy assistance to regional and field level Aviation Safety Inspectors (ASIs) on difficult or complex policy interpretations. The work is normally accepted without change. Completed work may be reviewed for adherence to FAA policy and for assurance that project requirements have been fulfilled.

Some FG-14 assignments involve region wide responsibility for application of expert knowledge of advanced multiengine turbojet aircraft. Such employees are concerned with all aspects of the operational capabilities and limitations of the aircraft. Other FG-14 inspectors establish technical procedures and performance yardsticks and review complete maintenance programs for major air carriers who are leaders in the aviation industry, or who have problems of comparable scope and complexity, or a uniquely complex group of general aviation organizations. Assignments at this level are of great scope and unusual complexity and the organizations monitored are major factors in the industry.

ASIs at the FG-14 level establish technical procedures and performance indexes and review complete maintenance programs for major air carriers who are leaders in the aviation industry, or who have problems of comparable scope and complexity, or a uniquely complex group of general aviation organizations. Assignments at this level are of great scope and unusual complexity.

The following assignments are illustrative:

1. As a Service wide expert on a particular type of sophisticated multiengine turbojet aircraft:
-- Serves on national boards that determine the minimum equipment necessary to operate a particular type of
aircraft safely; and
-- Serves on boards that evaluate incidents, accidents, complaints, and other serious problems relating to the
aircraft. Develops plans to resolve problems.

2. As the principal representative in regulatory surveillance of air carrier activities, exercises certificate authority over a major air carrier with very extensive and complex operations. Analyzes flight operations involving large fleets of turbojet aircraft engaged in large-scale passenger and freight service; or evaluates maintenance activities and complete aircraft overhaul facilities which are equipped and staffed to handle the latest and most sophisticated turbojet aircraft and associated systems. This level includes responsibility for nationally and internationally prominent carriers who operate the largest, most advanced fleets of turbojet aircraft in the industry. (By comparison, FG-13 employees exercise certificate authority over less complex air carriers or perform major portions of the certification, inspection, surveillance for major carriers under the direction of FG-14 inspectors.)

3. Exercises certificate authority and safety responsibility over a complex of broad and varied general aviation organizations such as operator maintenance facilities and contracted repair stations when the activities monitored equate collectively to a major air carrier in terms of size and complexity of aircraft fleet employed, scope and technical complexity of operations, management sophistication, industry leadership, and public impact. The magnitude, intensity, and scope of program responsibility are typically such as to require significant and regular assistance of lower graded inspectors.

FG-14 employees evaluate flight operations programs for organizations which utilize complex aircraft, systems, and equipment. Because of organizational complexity or the advanced technology incorporated in the aircraft, systems, and equipment, employees must exercise originality to resolve unique problems.

Job Requirements:

Requirements Conditions of Employment

US Citizenship is required.
Selective Service Registration is required for males born after 12/31/1959.
Must submit an SF50 (See Required Documents).
This is not a virtual position.

Qualifications

Medical Requirements: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, and must meet all of the following requirements:

A. Have a good distant vision in each eye and be able to read printed materials the size of typewritten characters (glasses and contact lenses permitted) without strain;

B. Have the ability to hear the conversational voice (hearing aid permitted);

C. Not have any physical condition that would cause them to be a hazard to themselves or others or that would interfere with their ability to fly as passengers in a variety of aircraft.

Specialized Experience: To qualify for this position you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-I, FG/GS-13 level. Specialized experience is experience that has equipped you with the particular knowledge, skills and abilities to perform successfully the duties of the position. Specialized experience may include but not limited to conducting an adequate training program, including an acceptable record keeping system. Conducting of enforcement investigations and preparation of final reports and recommendations on disposition. Monitoring all phases of the air carrier's maintenance operation, including the following: maintenance, engineering, quality control, production control, training, and reliability programs. Monitoring the activities of air operators, air agencies, airmen, and designees.

In addition to the specialized experience requirement you must meet all of the following requirements for Air Carrier Maintenance:

A. Experience involving the maintenance and repair of airframes, power plants, and systems of multi-engine aircraft of more than 12,500 pounds maximum certificated takeoff weight maintained under an airworthiness maintenance and inspection program.

B. Aircraft maintenance experience in a repair station; air carrier or airline repair facility; military repair facility; or local, state, or Federal governmental agency.

C. Experience involving the maintenance and repair of airframes, power plants, and aircraft systems with responsibility for certifying airworthiness.

D. Aircraft maintenance work experience within the last 3 years.

E. FAA Mechanic Certificate with airframe and power plant ratings.

NOTE: Recency of specialized experience is waived for current FAA employees in the 1825 series.

For more information regarding the minimum eligibility requirements for Aviation Safety Inspectors, please visit the following website: https://www.opm.gov/qualifications/Standards/IORs/gs1800/1825.htm

As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the initial application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA.

In lieu of providing a KSA narrative response in the text box listed below each KSA, in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA. Your work history examples should be specific and clearly reflect the highest level of ability. Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided. Your answers may be adjusted by a Human Resource Specialist as appropriate.

Eligible applicants meeting the minimum qualification requirements and selective factor(s), if applicable, may be further evaluated on the Knowledge, Skills and Abilities (KSA); listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories; score order, category grouping, or alphabetical and referred to the selecting official for consideration.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses.

Required Documents

All Applicants MUST provide a copy of their FAA Mechanic Certificate with airframe and power plant ratings. Only supplemental documentation, e.g., transcripts or veteran's documentation will be accepted in combination with your on-line application. These documents must be uploaded with your application or faxed to 718-995-5688 on or before the closing date of this announcement. All submitted documents should reference the announcement number.

If you are an FAA employee, you MUST provide a copy of your SF-50 (Notification of Personnel Action) containing information in Blocks 15, 17, 18, 19, 22, and 24 so it can be used to verify your position title, series, grade, tenure, and organization of record by the closing date of the announcement. You may fax your SF-50 or upload it into the on-line application. If faxing the SF-50, please ensure you include the vacancy announcement number on the faxed copy.

If you are an FAA employee, you can access and print your SF-50 from the eOPF system https://eopf.opm.gov/dot/.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Job Ident #: 8362054000

Company Details

Federal Aviation Administration

800 Independence Ave, SW
Washington, DC 20591 USA
www.faa.gov/jobs

Our continuing mission is to provide the safest, most efficient aerospace system in the world. We strive to reach the next level of safety, efficiency, environmental responsibility and global leadership. We are accountable to the American public and ...

Benefits:
TBD

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

Job Info

Location

Indianapolis, Indiana, United States

Type

Contractor

Salary Range

$106,382 - $138,296

Company Details

Federal Aviation Administration

800 Independence Ave, SW
Washington, DC 20591 USA
www.faa.gov/jobs